By sion932 
After being used for a long time, any equipment in a factory needs to be tested for its corresponding resistance and voltage issues to ensure that there will be no faults or problems during the entire use. When choosing the corresponding testing tool, the testing steps will also be asked? Is it relatively simple? In fact, from some aspects, we can tell everyone that series resonance (also known as AC withstand voltage tester) makes detection easier.
Firstly, the entire page of series resonance is relatively simple. If you choose other measurements, you will definitely find many different buttons. It takes a long time to design the corresponding data during operation to ensure that the overall measurement data is accurate. This will inevitably require a lot of time and effort from everyone, and it is more likely to lead to inaccurate measurement data due to some incorrect steps during operation, which will also cause significant problems for subsequent maintenance. But series resonance is different. Its entire operation is relatively simple, and it can quickly identify the resistance and voltage issues of the repaired equipment thoroughly. Choosing the corresponding solution will also be relatively simple and clear, and it will not be in vain.
Secondly, when using series resonance, it has a very stable personality and does not require unstable performance of the testing instrument, sometimes strong and sometimes weak. There will be a lot of trouble during the entire use, which will lead to poor measurement results. However, when choosing series resonance, there is no need to worry about this issue at all, because its overall performance is stable, and after designing the data, you can directly understand the corresponding detection data.
So from the above aspects, we can answer that series resonance is simpler and can become a way for everyone to test factory equipment and instruments. Therefore, if you need it, you can still choose it, and it will not disappoint you.